中文字幕亂偷近親相姦,99在线观视频免费观看,91黑料精品国产,国产色婷婷亚洲99精品

天津美隆航經銷PETOL Gearench摩擦鉗

PETOL GEARENCH公司成立于1927年，其第一款專利產品是一只用于小口徑管子的手動工具。從這個工具開始，該公司已發展為擁有40多個產品線的企業，這些產品用于石油行業中的各個領域，包括勘探、鉆井、成產和提煉等工藝步驟。這些工具也在水井、非開挖技術鉆井、采礦、發電應用和一般工業領域中得到應用。

一、PETOL Surgrip Friction Tongs

PETOL FRICTION TONGS W/CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.

此摩擦鉗主要用于在握住和旋轉管子的過程中需要保護的操作。由于鉗子本身沒有齒片或齒部嵌件來損壞表面，因此在操作的過程中僅需通過摩擦來轉動管子。此摩擦鉗操作簡便，能夠保證齒合度。您在訂購此產品時，要明確所使用鉗子的精確外徑尺寸。

二、PETOL Friction Tongs w/Chain

PETOL FRICTION TONGS W/CHAIN were designed especially for holding and turning pipe that must be carefully protected. The tongs have no bits or teeth inserts to mar the surface and therefore must turn the pipe by friction alone. The tongs are easily applied and removed and cannot jam or bind. Perfect ratcheting action and efficient performance are assured. When ordering, make sure to specify the exact O.D. on which the tongs are to be used.

此摩擦鉗主要用于在握住和旋轉管子的過程中需要保護的操作。由于鉗子本身沒有齒片或齒部嵌件來損壞表面，因此在操作的過程中僅需通過摩擦來轉動管子。此摩擦鉗操作簡便，能夠保證齒合度。您在訂購此產品時，要明確所使用鉗子的精確外徑尺寸。

三、PETOL Surgrip Friction Vise

PETOL SURGRIP FRICTION VISES provide oil field pump manufacturers and pump repair shops with a friction vise having superior noncrushing and nonmarring features for use in final assembly or repair of sub-surface pumps.
Surgrip Friction Vises come in two sizes, ZV35-52 and ZV55-54. Interchangeable aluminum bushings are available to meet specific O.D. requirements.
The ZV55-54 PETOL Surgrip Friction Vise can be fitted with special adaptor bushings enabling it to handle all the smaller O.D.'s of the ZV35-52.
Note: Vise Plate, Vise Plate Bolt & Nuts, and Vise Bushings must be ordered separately.

油田泵制造商和泵維修廠所供應的摩擦夾鉗在總裝配或深井泵修復的應用中具有耐擠壓和耐磨損特性。它有兩種規格：ZV35-52 和 ZV55-54，可更換的鋁襯套符合特定的外徑要求。ZV55-54規格的摩擦夾鉗可配備專用的適配器襯套，它用來處理所有較小ZV35-52規格的外徑的摩擦夾鉗。
注意：夾鉗底板、夾鉗底板的螺釘螺母、夾鉗襯套需單獨訂購。

四、PETOL Surgrip Torque Wrench

PETOL SURGRIP TORQUE WRENCHES offer exact measurement in ft.-lbs. of torque when making up pump parts. Each wrench is bored to grip a specific O.D. by friction alone and will not mar the surface of the parts.
These wrenches offer the features of the PETOL Surgrip Friction Tong and can be used with any 1/2" or 3/4" drive “click-type” torque wrench handle.

在裝配泵零件時，此扳手提供準確的扭矩測量（英尺-磅）。每個扳手僅通過摩擦就能夾住一個特定的外徑，并且不損壞零件表面。這些扳手具有摩擦鉗的特性，它們能和任何“1/2”或“3/4”驅動“點擊式“扭矩扳手手柄一起使用。

五、PETOL Hydraulic Friction Breakout Unit

The PETOL HYDRAULIC FRICTION BREAKOUT UNIT will not mar the surface of the parts being made up and broken out. Each hydraulic Friction Tong and Surgrip Vise Bushing is bored to grip a specific O.D. by friction alone. The units are powered by an electric motor and have a pressure gauge that reads out in ft.-lbs. of torque and PSI. For added safety, a controlled pressure relief valve allows the operator to adjust the working pressure for each job. When the set pressure is accomplished the system stops torquing.
NOTE: Maximum working loads range from 500 ft.-lbs. to 5,000 ft.-lbs. depending on size of tong being used.

在裝配或拆卸的過程中，此裝置不會損害零件表面。每個摩擦鉗和鉗夾襯套僅通過摩擦就能夾住一個特定的外徑。此裝置是用一個電機驅動的，并有一個壓力計來讀取扭矩（英寸-磅）和時間的值。為了增加安全性，允許操作員通過控制減壓閥來調整每次作業時的使用壓力。當完成所設定的壓力值，系統將停止扭轉。
注意：所使用的鉗子尺寸決定了最大工作負荷，它的范圍是：“500英尺-磅”到“5000英尺-磅”。